As an Amazon Associate I earn from qualifying purchases.
1. ETEKJOY #ad
5X Writable IC Card No Software, SDK, ETEKJOY ACR122U NFC RFID 13.56MHz Contactless Smart Card Reader Writer w/USB Cable #adETEKJOY #ad
- Support iso 14443 type a and b, mifare, felica, and all 4 types of NFC ISO/IEC 18092 tags. Frequency: 13. 56mhz. If you are not familiar with it, don't buy.
1. Read/write speed up to 424 kbps. Card reading distance of up to 50 mm depending on tag type. You have to get a third-party application/software to work with it by yourself.
It is professional hardware. Support new mifare ultralight c via pseudo apdus and Mifare Plus SL1 4 Byte UID, via pseudo APDUS and SL3. No software provided. It works for frequency 13. 56mhz only. Ccid standard. Pcsc compliant. It doesn't work for other frequencies. Usb interface. 2.
2. HongTie #ad
English 10 Frequency RFID NFC Card Copier Reader Writer for IC ID Cards and All 125kHz Cards +13.56mhz UID Key +1USB #adHongTie #ad
- Support reading & writing 10 frequencies: 125khz, 500khz, 750khz, 250kHz, 1000khZ, 375khz, 875khz, 13.56mhziso1443a/b, 625khz, 125kHz Prox cards. It does not work for fully-encrypted cards! By its decoding software, it may work for some of half-encrypted cards, but not all.
3. 2inch screen display and voice operation prompt, 4 AAA batteries power, portable to use. Support reading: em4100/em4200, mifare classic, em4305, ultralight, t5577, 1386/1326/1346; support writing: 1386/1326/1346, UID cards, Ntag203, Mifare UID cards. Note: it works for unencrypted cards.
3. Lexi #ad
13.56MHz Encrypted Programmer, USB Interface, RFID Smart Card Reader Writer, with UID/T5577 Writable Key Cards and Software, LEXI RFID NFC Duplicator, 125KHz Key fob Copier #adLexi #ad
- Obtain the software when you connect this product to a computer, you can find the software on the computer. Led warning light / buzzerthe led reminder light is red in standby mode, the green light is in card reading status, and a built-in buzzer is provided for convenient and effective reminders.
Lightweight and easy to useabS flame-retardant material shell, high-quality microchip control inside, small size and thin, fast card reading effect.
Working frequency125khz / 13. 56 mhz, support ic / ID dual frequency replication. Usb full speed efficient1. 2 meters long usb transmission line connected to the device, no need to install a driver, respond immediately, quickly read the card number. You can also download the software via the link in the "NOTE" section below this product page.
4. SYWAN #ad
English 10 Frequency NFC RFID Card Copier Reader Writer Duplicator for IC ID Cards and All 125kHz Cards,10pcs ID 125khz Cards + 10pcs ID 125kh Keyfobs + 10pcs 13.56mhz IC Key + 1 USB 08CD #adSYWAN #ad
- Card type compatible:half-encrypted card compatible but not for fully-encrypted cards, can read EM4100, T5577, EM4305 cards. Not for hotel card, UID cards, bank card and the card with balance.
Package include: 1 * handheld rfid nfc copier reader writer, 10 * ic-13. 56mhz keyfobs, 10 * id-125khz cards, 1 * uSB cable, 10 * ID-125kh keyfobs. Color screen with voice design:3. 2inch hd color screen display, the RFID reader have voice operation prompt.
Note:it doesn't work for fully-encrypted cards. Support 10 frequency:id-125khz, id-250khz, id-875khz, id-1000khz, id-375khz, id-500khz, id-625khz, id-750khz, iC-13.56mhz, hid-125khz. By its decoding software, it may work for most half-encrypted cards, but not all. We hope you can confirm with us whether it can work for you through QA before purchasing.
5. LIBO Smart Home #ad
LIBO RFID Smart Card Reader Writer NFC 13.56MHz Copier 125KHz Duplicator Programmer Multi-Frequency Decoding Software USB Support with Readable Rewritable RFID Keyfobs Tags #adLIBO Smart Home #ad
- Working frequency support to read & write: 125khz, 500khz, 625khz, 875khz, 1000khz, 750khz, 250khz, 13.56mhz iso1443a/b, 375khz, support HID Prox cards.
The frequency of copy card should be as the same as original card. Attentions: working with 4*aaa battery the battery is not included in the package. Package list: a rfid card copier + a usb cable + 5 pieces 13.
56mhz uid keyfobs + 5 pieces 125KHz rewritable keyfobs. Card type support to write: t5577, hid 1386/1326/1346, em4305, UID cards. Card type support to read: em4100/em4200, uid cards, ultralight, Mi-fare classic, HID 1386/1326/1346, Ntag203. Can not support to read encrypted card, except 13. 56mhz encrypted card.
6. JYT-TOOLS #ad
RFID Copier Writer Readers Duplicator 125KHz 13.56MHz Programmer NFC Smart 10 Frequency Key fob Cards Reader UID Decoder #adJYT-TOOLS #ad
- It does not work for fully-encrypted cards! By its decoding software, it may work for some of half-encrypted cards, but not all.
1, not compatible for iClass, awid, Indala and Keri cards.44 aaa batteries or uSB power supply is supported batteries not included. Note: it works for unencrypted cards. 3, ultralight, em4305, support read:em4100/em4200, 1386/1326/1346;support cards write: 1386/1326/1346, t5577, Ntag203, uid cards, mifare classic, Mifare UID cards.2
2, id625khz, id 250khz, id1000khz, id375khz, id500khz, id 875khz, id 750khz, ic13.56mhziso1443a/b, support read write Frequency: ID 125KHz, HID125kHz Prox cards.
7. ACS #ad
ACR1252U USB NFC Reader III #adACS #ad
- Usb 2. 0 full speed Interface. Nfc support: nfc reader/writer mode, Peer-to-Peer Mode, Card Emulation Mode. Supports iso 14443, mifare, felica, and all 4 types of NFC ISO/IEC 18092 tags.
8. HFeng #ad
HFeng 13.56MHz RFID Copier Card Reader Writer NFC Programmer USB + Free SDK Software +5pcs S50 MF Cards + 5pcs UID Writable Keyfobs ACR122U #adHFeng #ad
- 1. Ccid-compliant; pc/sc-compliant; Read/write speed up to 424 kbps;. 4. Working frequency with 13. 56mhz frequency, can be used as both card reader and writer.
Supports new ic ultralight c via pseudo apdus and IC Plus SL1 4 Byte UID, via pseudo APDUS and SL3. Supports iso 14443 type a and b, felica, and all 4 types of nfc iso/iec 18092 tags.
Package including 1 card reader writer + 5pcs S50 cards + 5pcs UID writable keyfobs + free SDK software. 2. Operating distance: up to 50mm depends on tag type. 3. 5. Built-in antenna for contactless tag access, with card reading distance of up to 50 mm depending on tag type.
9. myownid #ad
RFID Card Reader 13.56MHz Mifare Reader/Writer: Can Works as a Mifare Card UID Reader OR a Mifare Card Programmer Windows Program Support +5 Mifare Cards #admyownid #ad
- 2 mifare card reader mode reads uid of 14443a mifare card, UltraLight, Mifare Desfire, mifare Plus, include Mifare Classic, Mifare N-TAG/card emulation.4 mifare card writer mode is usb 2.
0 interface, program mifare Classic 1K/4K card sector data. 5 mifare 13. 56m writer supports the 2nd development with your own program, I can provide debug demo programmer by email. Only windows software is provided & it supports 1K/4K memory card only.
3 mifare 13. 56mhz rfid reader interface is hid usb, has 28 output formats, configurable to simulate USB keyboard input or USB 2. 0, supports android Linux Windows iOsOTG adapter is requested under Android. 1 mifare card writer/mifare card uid reader simulate keyboard input/mifare Card UID READER USB 2. 0 communication; The Reader intergated 3 working modes, switched with config card.
|Part Number||RFID Reader01|
10. OBO HANDS #ad
OBO HANDS English RFID NFC Copier Reader Writer Duplicator 10 Frequency Programmer with Color Screen +5pcs UID Tag+5Pcs UID Cards #adOBO HANDS #ad
- Supports reading and writing frequency: 125khz, 625khz, 500KHz, 875khz, 1000KHZ, 375khz, 250khz, 750khz, 13.56mhz iso14443a/B.
Hd 3. 2-inch full color screen. Supports card writing: t5577, EM4305, Mifare UID cards. Id/ic full hand, English voice broadcast. Cant support write and read encryption hid card.